The size of the cabinet affects using, therefore a more professional measuring method will help to install the cabinets at the best position.

When measuring, it is necessary to pay attention to the below points:

1. It is the best to measure the length twice, from left to right and from right to left, to avoid reading the wrong size.

2. When measuring the height of the ceiling, measure the quasi-high points in several different directions, and to make sure if there are beams under the gusset.

3. Measure the height of the bottom of the motorized socket to the floor, and the height of the window.

4. Measure the height and distance of the pipeline from the wall, the height of the water inlet and outlet, the distance from the drainage mains to the wall, the height of the sockets, etc.

5. Check whether there are steps on the ground, whether there are concave and convex beams on the wall, and the pulling of the screens should be considered when making the wall cabinets by the windows. 

6. Before remeasuring, the floor tiles should be paved and the wall tiles should be attached. For the wall cabinet or the high cabinet which is to the ceiling, the roof should be well hanged.

7. When measuring the special shape or polygon, it is the best to choose the fixed point and measure the diagonal. When the two sides are against the wall, the inner and outer distances should be measured.